Polymer Coatings: Technologies and Applications
Technologies and Applications
Sanjay Mavinkere Rangappa (Redaktør) ; Jyotishkumar Parameswaranpillai (Redaktør) ; Suchart Siengchin (Redaktør)
Polymer Coatings: Technologies and Applications provides a comprehensive account of the recent developments in polymer coatings
encompassing novel methods, techniques, and a broad spectrum of applications. Les mer
- Vår pris
- 2194,-
(Innbundet)
Fri frakt!
Leveringstid:
Sendes innen 21 dager
Innbundet
Legg i
Innbundet
Legg i
Vår pris:
2194,-
(Innbundet)
Fri frakt!
Leveringstid:
Sendes innen 21 dager
Polymer Coatings: Technologies and Applications provides a comprehensive account of the recent developments in polymer coatings
encompassing novel methods, techniques, and a broad spectrum of applications. The chapters explore the key aspects of polymer
coatings while highlighting fundamental research, different types of polymer coatings, and technology advances. This book
also integrates the various aspects of these materials from synthesis to application. Current status, trends, future directions,
and opportunities are also discussed.
FEATURES
Examines the basics to the most recent advances in all areas of polymer coatings
Serves as a one-stop reference
Discusses polymer-coated nanocrystals and coatings based on nanocomposites
Describes morphology, spectroscopic analysis, adhesion, and rheology of polymer coatings
Explores conducting, stimuli-responsive, self-healing, hydrophobic and hydrophilic, antifouling, and antibacterial polymer coatings
Covers modeling and simulation
With contributions from the top international researchers from industry, academia, government, and private research institutions, both new and experienced readers will benefit from this applications-oriented book.
Sanjay Mavinkere Rangappa is a research scientist at the Natural Composites Research Group Lab, Academic Enhancement Department, King Mongkut's University of Technology North Bangkok, Thailand.
Jyotishkumar Parameswaranpillai is a research professor at the Center of Innovation in Design and Engineering for Manufacturing, King Mongkut's University of Technology North Bangkok, Thailand.
Suchart Siengchin is a professor at and president of King Mongkut's University of Technology North Bangkok, Thailand.
FEATURES
Examines the basics to the most recent advances in all areas of polymer coatings
Serves as a one-stop reference
Discusses polymer-coated nanocrystals and coatings based on nanocomposites
Describes morphology, spectroscopic analysis, adhesion, and rheology of polymer coatings
Explores conducting, stimuli-responsive, self-healing, hydrophobic and hydrophilic, antifouling, and antibacterial polymer coatings
Covers modeling and simulation
With contributions from the top international researchers from industry, academia, government, and private research institutions, both new and experienced readers will benefit from this applications-oriented book.
Sanjay Mavinkere Rangappa is a research scientist at the Natural Composites Research Group Lab, Academic Enhancement Department, King Mongkut's University of Technology North Bangkok, Thailand.
Jyotishkumar Parameswaranpillai is a research professor at the Center of Innovation in Design and Engineering for Manufacturing, King Mongkut's University of Technology North Bangkok, Thailand.
Suchart Siengchin is a professor at and president of King Mongkut's University of Technology North Bangkok, Thailand.
- FAKTA
-
Utgitt:
2020
Forlag: CRC Press
Innbinding: Innbundet
Språk: Engelsk
Sider: 380
ISBN: 9780367189211
Format: 23 x 16 cm
- KATEGORIER:
- VURDERING
-
Gi vurdering
Les vurderinger
1. Introduction to Polymeric Coatings
[Manju Rawat, Daisy Sharma, Jyoti Sharma, Sanjeev Kumar Ahuja, Avinash Chandra, Saghamitra Barman, and Raj Kumar Arya]
2. Polymer Coatings Methods
[Daisy Sharma, Manju Rawat, Jyoti Sharma, Sanjeev Kumar, Ahuja, Avinash Chandra, Sanghamitra Barman, and Raj Kumar Arya]
3. Polymer Coatings Based on Nanocomposites
[Liliana Licea-Jimenez, Ulises Antonio Mendez-Romero, Abraham Mendez-Resendiz, Arturo Roman Vazquez-Velazquez, Ricardo Antonio Mendoza-Jimenez, Diego Fernando Rodiguez-Diaz, and Sergio Alfonso Perez-Garcia]
4. Mechanism, Anti-Corrosion Protection and Components of Anti-Corrosion Polymer Coatings
[Akarsh Verma, Naman Jain, Shweta Rastogi, Vaishally Dogra, M. R. Sanjay, Suchart Siengchin, and Rokbi Mansour]
5. Morphology of Polymer Coatings
[Jyoti Sharma, Manju Rawat, Daisy Sharma, Sanjeev Kumar, Ahuja, Avinash Chandra, Sanghamitra Barman, and Raj Kumar Arya]
6. Spectroscopic Analysis of Polymer Coatings
[Jyoti Sharma, Manju Rawat, Daisy Sharma, Sanjeev Kumar Ahuja, Avinash Chandra, Sanghamitra Barman, and Raj Kumar Arya]
7. Rheology of Polymer Coatings
[M. Gagliardi]
8. Cure Reactions of Polymer Coatings
[Piotr Czub and Anna Sienkiewicz]
9. Thermal and Mechanical Properties of Polymer Coatings
[Emerson Escobar Nunez, Kian Bashandeh, and Andreas A. Polycarpou]
10. Conducting Polymer Coatings for Corrosion Protection
[George Kordas]
11. Stimuli-Responsive Polymer Coatings
[Fabrice Ofridam, Mohamad Tarhini, Waisudin Badri, Wei Liao, Noureddine Lebaz, Emilie Gagniere, Denis Mangin, Emilie Dumas, Sami Ghnimi, Abdelhamid Errachid El Salhi, Adem Gharsallaoui, Hatem Fessi, and Abdelhamid Elaissari]
12. Self-Healing Polymer Coatings
[Poornima Vijayan P. and Sharika T. Nair]
13. Hydrophobic and Hydrophilic Polymer Coatings
[Sanjay Remanan, Harikrishnan Pulikkalparambil, Sanjay Mavinkere Rangappa, Suchart Siengchin, Jyotishkumar Parameswaranpillai, and Narayan Chandra Das]
14. Antifouling, Antibacterial, and Bioactive Polymer Coatings
[Anna Sienkiewicz and Piotr Czub]
15. Adhesion of Polymer Coatings
[S. Verma, S.K. Nayak, and S. Mohanty]
16. Modeling and Simulation in Polymer Coatings
[Akarsh Verma, Avinash Parashar, Sandeep Kumar Singh, Naman Jain, M. R. Sanjay, and Suchart Siengchin]
17. Future Challenges and Applications of Polymer Coatings
[Mohit H, Sanjay M. R., Suchart Siengchin, Hemath Kumar G., Arul Mozhi Selvan V., and Ruban R.]
18. Incorporation of CeMo Nanocontainers Loaded with Inhibitors, Water, and Chlorine Microtraps into Anticorrosion Coatings onto ZK30
[George Kordas]
[Manju Rawat, Daisy Sharma, Jyoti Sharma, Sanjeev Kumar Ahuja, Avinash Chandra, Saghamitra Barman, and Raj Kumar Arya]
2. Polymer Coatings Methods
[Daisy Sharma, Manju Rawat, Jyoti Sharma, Sanjeev Kumar, Ahuja, Avinash Chandra, Sanghamitra Barman, and Raj Kumar Arya]
3. Polymer Coatings Based on Nanocomposites
[Liliana Licea-Jimenez, Ulises Antonio Mendez-Romero, Abraham Mendez-Resendiz, Arturo Roman Vazquez-Velazquez, Ricardo Antonio Mendoza-Jimenez, Diego Fernando Rodiguez-Diaz, and Sergio Alfonso Perez-Garcia]
4. Mechanism, Anti-Corrosion Protection and Components of Anti-Corrosion Polymer Coatings
[Akarsh Verma, Naman Jain, Shweta Rastogi, Vaishally Dogra, M. R. Sanjay, Suchart Siengchin, and Rokbi Mansour]
5. Morphology of Polymer Coatings
[Jyoti Sharma, Manju Rawat, Daisy Sharma, Sanjeev Kumar, Ahuja, Avinash Chandra, Sanghamitra Barman, and Raj Kumar Arya]
6. Spectroscopic Analysis of Polymer Coatings
[Jyoti Sharma, Manju Rawat, Daisy Sharma, Sanjeev Kumar Ahuja, Avinash Chandra, Sanghamitra Barman, and Raj Kumar Arya]
7. Rheology of Polymer Coatings
[M. Gagliardi]
8. Cure Reactions of Polymer Coatings
[Piotr Czub and Anna Sienkiewicz]
9. Thermal and Mechanical Properties of Polymer Coatings
[Emerson Escobar Nunez, Kian Bashandeh, and Andreas A. Polycarpou]
10. Conducting Polymer Coatings for Corrosion Protection
[George Kordas]
11. Stimuli-Responsive Polymer Coatings
[Fabrice Ofridam, Mohamad Tarhini, Waisudin Badri, Wei Liao, Noureddine Lebaz, Emilie Gagniere, Denis Mangin, Emilie Dumas, Sami Ghnimi, Abdelhamid Errachid El Salhi, Adem Gharsallaoui, Hatem Fessi, and Abdelhamid Elaissari]
12. Self-Healing Polymer Coatings
[Poornima Vijayan P. and Sharika T. Nair]
13. Hydrophobic and Hydrophilic Polymer Coatings
[Sanjay Remanan, Harikrishnan Pulikkalparambil, Sanjay Mavinkere Rangappa, Suchart Siengchin, Jyotishkumar Parameswaranpillai, and Narayan Chandra Das]
14. Antifouling, Antibacterial, and Bioactive Polymer Coatings
[Anna Sienkiewicz and Piotr Czub]
15. Adhesion of Polymer Coatings
[S. Verma, S.K. Nayak, and S. Mohanty]
16. Modeling and Simulation in Polymer Coatings
[Akarsh Verma, Avinash Parashar, Sandeep Kumar Singh, Naman Jain, M. R. Sanjay, and Suchart Siengchin]
17. Future Challenges and Applications of Polymer Coatings
[Mohit H, Sanjay M. R., Suchart Siengchin, Hemath Kumar G., Arul Mozhi Selvan V., and Ruban R.]
18. Incorporation of CeMo Nanocontainers Loaded with Inhibitors, Water, and Chlorine Microtraps into Anticorrosion Coatings onto ZK30
[George Kordas]
Sanjay Mavinkere Rangappa earned a BE in mechanical engineering at Visvesvaraya Technological University, Belagavi, India;
an MTech in computational analysis in mechanical sciences at VTU Extension Centre, GEC, Hassan; and a PhD in mechanical engineering
at Visvesvaraya Technological University, Belagavi, India. Dr Sanjay did postdoctoral work at King Mongkut’s University of
Technology North Bangkok, Thailand. He is a Life Member of the Indian Society for Technical Education (ISTE) and an Associate
Member of Institute of Engineers (India). He is a reviewer for more than 50 international journals (Elsevier, Springer, Sage,
Taylor & Francis, Wiley), book proposals, and international conferences. He has published more than 85 articles in high-quality
international peer-reviewed journals, 3 editorial corners, 20+ book chapters, 1 book, and 15 books as an editor, and presented
research papers at national and international conferences. His research areas include natural fiber composites, polymer composites,
and advanced material technology. He is a recipient of the DAAD Academic exchange-PPP Programme (project-related personnel
exchange) between Thailand and Germany at the Institute of Composite Materials, University of Kaiserslautern, Germany. He
has received a Top Peer Reviewer 2019 award, Global Peer Review Awards, Powered by Publons, Web of Science Group. He is currently
a research scientist at the Natural Composites Research Group Lab, Academic Enhancement Department, King Mongkut’s University
of Technology North Bangkok, Thailand.
Jyotishkumar Parameswaranpillai earned a PhD in polymer science and technology (chemistry) at Mahatma Gandhi University. He has research experience at various international laboratories, such as the Leibniz Institute of Polymer Research Dresden (IPF), Germany; Catholic University of Leuven, Belgium; and University of Potsdam, Germany. He has published more than 100 papers in high-quality international peer-reviewed journals on polymer nanocomposites, polymer blends and alloys, and biopolymer, and he has edited five books. He received numerous awards and recognitions, including the prestigious Kerala State Award for the Best Young Scientist 2016, INSPIRE Faculty Award 2011, and Best Researcher Award 2019 from King Mongkut’s University of Technology North Bangkok. He is currently a research professor at the Center of Innovation in Design and Engineering for Manufacturing, King Mongkut’s University of Technology North Bangkok, Thailand.
Suchart Siengchin earned a DiplIng in mechanical engineering at the University of Applied Sciences, Giessen/Friedberg, Hessen, Germany; an MSc in polymer technology at the University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany; an MSc in material science at the Erlangen-Nurnberg University, Bayern, Germany; and a DrIng in engineering at the Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany. His postdoctoral research was at Kaiserslautern University and the School of Materials Engineering, Purdue University, West Lafayette, Indiana, USA. He received the habilitation at the Chemnitz University in Sachsen, Germany. He was a lecturer of the Production and Material Engineering Department at the Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkut’s University of Technology North Bangkok (KMUTNB). He is a full professor at and president of KMUTNB. He received the Outstanding Researcher Award in 2010, 2012, and 2013 at KMUTNB. His research interests include polymer processing and composite material. He is Editor-in-Chief of KMUTNB International Journal of Applied Science and Technology and the author of more than 150 peer-reviewed journal articles. He has participated in presentations at more than 39 international and national conferences with respect to materials science and engineering topics.
Jyotishkumar Parameswaranpillai earned a PhD in polymer science and technology (chemistry) at Mahatma Gandhi University. He has research experience at various international laboratories, such as the Leibniz Institute of Polymer Research Dresden (IPF), Germany; Catholic University of Leuven, Belgium; and University of Potsdam, Germany. He has published more than 100 papers in high-quality international peer-reviewed journals on polymer nanocomposites, polymer blends and alloys, and biopolymer, and he has edited five books. He received numerous awards and recognitions, including the prestigious Kerala State Award for the Best Young Scientist 2016, INSPIRE Faculty Award 2011, and Best Researcher Award 2019 from King Mongkut’s University of Technology North Bangkok. He is currently a research professor at the Center of Innovation in Design and Engineering for Manufacturing, King Mongkut’s University of Technology North Bangkok, Thailand.
Suchart Siengchin earned a DiplIng in mechanical engineering at the University of Applied Sciences, Giessen/Friedberg, Hessen, Germany; an MSc in polymer technology at the University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany; an MSc in material science at the Erlangen-Nurnberg University, Bayern, Germany; and a DrIng in engineering at the Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany. His postdoctoral research was at Kaiserslautern University and the School of Materials Engineering, Purdue University, West Lafayette, Indiana, USA. He received the habilitation at the Chemnitz University in Sachsen, Germany. He was a lecturer of the Production and Material Engineering Department at the Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkut’s University of Technology North Bangkok (KMUTNB). He is a full professor at and president of KMUTNB. He received the Outstanding Researcher Award in 2010, 2012, and 2013 at KMUTNB. His research interests include polymer processing and composite material. He is Editor-in-Chief of KMUTNB International Journal of Applied Science and Technology and the author of more than 150 peer-reviewed journal articles. He has participated in presentations at more than 39 international and national conferences with respect to materials science and engineering topics.